quality Hazardous Waste Incinerator & Medical Waste Incinerator manufacturer

A method to solve the problem of disc feeder not discharging   1、 Check the feeding port The reason why the disc feeder does not discharge may be due to blockage in the feeding port. Therefore, the first step is to check whether the feeding port is clean and unobstructed. Inspection method: Turn off the feeder and open the feeding port. Use an air compressor or other tool to clean the residue inside the feeding port, and then reassemble the feeding port. 2、 Replacing the disc The disc of the disc feeder may deform or wear after being used for a period of time, resulting in failure to discharge. At this point, a new disc needs to be replaced. Replacement method: First, turn off the feeder, remove the ingredient tray, disassemble the original disc, install according to the specifications of the new disc, and then start the feeder after assembly to check if it is working properly. 3、 Adjusting the distance between the feeding chute If the disc feeder is too far away from the batching tank, the material cannot fully fill the feeding tank, resulting in no discharge. At this point, the distance between the disc and the feeding groove can be adjusted appropriately. Specific operation method: First, turn off the feeder, open the feeding groove, adjust the distance of the feeding groove, and adjust it to the appropriate position. 4、 Check if the motor is faulty If the motor of the disc feeder malfunctions, it can also lead to situations where the material cannot be discharged. Therefore, after ruling out the above reasons, the motor should be checked for normal operation. Inspection method: First, turn off the feeder and check whether the motor rotor shaft rotates normally. At the same time, check whether the cable is tightly inserted and whether the power supply is connected properly. In summary, there are various reasons why the disc feeder does not discharge, and it is necessary to analyze the reasons based on the actual situation and take corresponding measures to solve them. The above methods are for reference only. During the specific operation process, it is necessary to strictly follow the operating procedures to ensure safe production.  

Disc Feeders: Efficient and Reliable Material Handling Solutions     Introduction: Disc feeders, also known as rotary feeders or disc conveyors, are widely used in industries for efficient and reliable material handling. These devices provide a controlled and continuous flow of bulk materials, making them essential components in various production processes. In this article, we will explore the features, benefits, and applications of disc feeders.   Paragraph 1: A disc feeder consists of a rotating disc with multiple compartments or pockets that hold the bulk material. The rotation of the disc allows for controlled discharge of materials at a predetermined rate. The design ensures consistent feeding without causing blockages or excessive wear on the equipment.   Paragraph 2: One key advantage of disc feeders is their ability to handle a wide range of bulk materials with different particle sizes and characteristics. They can effectively handle both fine powders and larger granular materials without compromising accuracy or reliability. This versatility makes them suitable for diverse industries such as mining, cement production, chemical processing, and food manufacturing.   Paragraph 3: Efficiency is another significant benefit offered by disc feeders. Their precise control over material discharge rates ensures accurate dosing and minimizes waste or spillage during feeding operations. Additionally, their compact design allows for easy integration into existing production lines while optimizing space utilization.   Paragraph 4: Disc feeders are designed to operate reliably even under demanding conditions. The robust construction using high-quality materials enhances durability and minimizes maintenance requirements. Furthermore, some models incorporate features like adjustable paddles or scraper blades to prevent material buildup on the discs' surface.   Paragraph 5: The continuous flow provided by disc feeders enables seamless integration with downstream processes such as mixing systems or conveyor belts. This promotes smooth material transfer throughout the production line while minimizing disruptions or bottlenecks in operations.   Conclusion: Disc feeders offer efficient and reliable solutions for material handling in various industries. Their ability to handle a wide range of bulk materials, precise feeding control, and robust construction make them indispensable components in production processes. As industries strive for increased productivity and streamlined operations, disc feeders will continue to play a vital role in ensuring efficient material flow while reducing waste and downtime.

Five major inspection items for the disc feeder before operation     The disc feeder is a traditional silo discharge equipment that can withstand silo pressure, operate smoothly and reliably, and adjust the feeding amount easily. It still plays a very important role in production. The structure of the disc feeder is simple, reliable in operation, and easy to adjust and install. The disc feeder consists of a driving device, the feeder body, a measuring belt conveyor, and a measuring device. The feeder and belt conveyor are driven by a set of driving devices, and the electromagnetic clutch of the driving device has the function of realizing the start, stop, and functional conversion of the feeder. Five major inspection items for the disc feeder before operation 1) Check if all fastening bolts are loose. 2) Check if all lubrication points of the disc feeder are in good condition. 3) Check the tightness of the triangular belt and whether there is any breakage. 4) Check if the coupling is in good condition and undamaged. 5) Check that the gate, scraper, adjusting screw rod, and scraper must not collide with the inner lining of the disc.